top of page

3D BIOPRINTING HYDROGELS FOR TISSUE ENGEENERING

18 Oca 2023
4 dakikada okunur

Güncelleme tarihi: 16 May 2025

FEW THINGS FROM THE PAPER


Since the blood vessels were printed with a bioprinter for the first time in 2009, bioprinters have been used for bioprinting, cell printing and organ printing. Inadequate number of donors in traditional tissue and organ transplants and the high risks that may occur in the immunosystem have pushed 3D bioprinting technology to serve as a powerful tool to create tissue and organs that can be used instead of damaged and injured tissue in tissue engineering. Among the reasons why Hydrogels are preferred as bioinks, they have good biocompatibility, ease of loading of cells into hydrogels, compatibility with the physical and chemical properties of the extracellular matrix (ECM), not causing a dramatic decrease in viability, and providing a fourth dimension to the material after 3D bioprinting for future studies.




Bioprinting is the spatial modeling of the stacking and assembly of living cells and biological materials – such as growth factors – using a computer-aided layer-by- layer deposition technique for living tissue and organ production. Basic 3D Bioprinter types are shown in the figure


The bioinks used in the bioprinting method are the basic building blocks of this system. Bioinks are a solution or a mixture of several biomaterials in hydrogel form that encapsulates the cell types desired to form tissue, cell structures during printing.


Hydrogel, which is a 3-dimensional molecule, consists of a hydrophilic polymer chain and is insoluble in water, has high water absorption in aqueous environments, and can be designed in the desired size, shape and shape. The use of hydrogels in scaffolds has increased recently. The reasons for this are that hydrogels are biocompatible, biodegradable, easily cross-linked, have desired cell attachment sites (for cell attachment, proliferation, growth and differentiation), and have porous structures. Hydrogels are divided into 2 main groups; natural origin hydrogels (collagen, gelatin, hyaluronic acid, fibrin, chitosan, alginate, keratin and decellularized ECM) and synthetic hydrogels (polyacrylic acid derivatives, polyethylene glycol copolymers, polyphosphazene, polyvinyl alcohol and etc.) They are preferred as a popular bioink scaffold due to their excellent bioactivity and low mechanical properties, but they are not preferred to be used alone or without modification due to their low mechanical properties, low stability, and most importantly, causing harmful immune responses and rejection.


Synthetic origin hydrogels, on the other hand, have features such as strong mechanical properties, ease of control, low immunogenicity and biocompatibility (although it is still an important parameter compared to hydrogels of natural origin), as well as the reasons such as high temperature requirement for bioprinting, use of toxic synthetic organic hydrogels. they lack sufficient reasons to be used alone. However, studies with synthetic hydrogels are promising. Hydrogels can be chemically and physically cross-linked. Physical crosslinking is done by radiation reaction and electron beams, gamma rays, X-rays or UV light can be used.


In chemical cross-linking, cross-linking agents are used; these can be small molecular weight crosslinking agents to bring together 2 chains, or they can be used to bind a monomer and multifunctional monomer, or an interlinking agent such as polyurethane can be used to bind a monomer and another linear polymer.

The reasons for using bioprinting are to print damaged tissue and new tissues and organs that can replace the organ, and the important point here is that the structure of the cell, tissue, or organ to be printed is the same as the structure of the natural tissue, cell, organ.

For example, to print an artificial nerve tissue, it is necessary to consider the structure of murine stem cells (C17.2), collagen hydrogel, and fibrin gel that releases growth factor (vascular endothelial growth factor).

In order to promote the desired proliferation of the normal stem cells in the implanted region of the body tissue, the cells are mixed with a scaffold, where the scaffold must be biodegradable, or seeded on the scaffold and sent to the target site.


Cell attachment, mechanical support for 3D proliferation and the provision of growth factors (integration and release of bioactive proteins into the cell are important for supporting cellular functions in the hydrogel scaffold) are also performed with the help of scaffolding.


Lee et al. pressed and cultured murine stem cells ( C17.2) on the collagen scaffold, collagen is used because it supports cell culture for neural stem cells (NSC) and can promote cell adhesion.Vascular endothelial growth factor (VEGF) was chosen as growth factor (GF).

Fibrin gel, on the other hand, was used to deliver vascular endothelial growth factor (VEGF) to the tissue due to its mobility. 

The stability of the fibrin gel, which releases Collagen and VEGF after printing, and its effect on cell migration and proliferation were examined.



Collagen solutions at 3 different concentrations were prepared and printed by using collagen to support cell culture and cell adhesion for neural stem cells (NSC) and observed at what concentration of scaffold the C17.2 cells would survive. Fibrin gel containing VEGF (fibrinogen, heparin, and thrombin) and C17.2 cells was then imprinted with the optimized collagen concentration.

The morphology, migration, and survival rates of the cells obtained after printing were tested by staining with assay kits. 

Morphological analyses not only showed the stability of the hydrogel but also the morphological structure of the embedded fibrin gel—VEGF-releasing—in the collagen scaffold.

The movements of C17.2 cells – on the scaffold—were also observed using ImageJ.




Hsieh et al. In their study, they synthesized biodegradable water-based cell printing inks using polyurethane (PU) and polycaprolactone (PCL). Polyurethane is used both as an interlinking agent in hydrogels and is a preferred material in various tissue engineering thanks to its biodegradability feature.

Polycaprolactone, on the other hand, is preferred to be used together with polyurethane because of its good biocompatibility, water-soluble, biodegradable, and soft segments. The PU hydrogel dispersion can be easily adjusted to mimic the structure (hardness) of the nervous tissue, and the PU dispersion properties can be adjusted by the PU/PCL ratio.

Biodegradable and water-based heat- sensitive gel-forming PU dispersions without the use of cross-linkers have been developed, and NSCs are encapsulated in the PU hydrogel.  The bioink was then printed on a bioprinter.






Zebrafish embryos were used for animal experiments and different PU dispersions, NSCs mixed with PUs (PU1 nad PU2), and only NSC suspension as control group were used. 

Optimization of PU nanoparticles (PU1 and PU2) was made and cell printing process was started. NSCs and heated. Embryos injected into NSCs showed low cell life, while NSCs embedded in PU2 hydrogels both multiplied in the embryo and expanded into all brain regions, especially in 25% PU2 hydrogel cap was gone.

NSCs embedded in 25% and 30% PU1 hydrogels survived but did not distribute to other parts of the brain.


In a study in adult zebrafish with traumatic brain injury, animals implanted with 25% PU2 constructs loaded with imprinted NSCs showed 25%, 62%, and 81% recovery rates in motion after 2, 4, and 6 days, respectively, while the control group did not show functional recovery even after 4 days.


In addition, the control group suffered the death of 85% of the experimental animals within 8 days after the lesion. In contrast, 3D-printed NSC-loaded constructs’mortality rate was reduced to 37%.

From results we can say that 3D- printed NSC loaded structures can repair the central nervous system.


Tseng et al. synthesized a chitosan-based self-healing, injectable hydrogel using DF-PEG and glycol chitosan solutions.Thanks to its self-healing injectability, it is ensured that there is no gel fragmentation compared to normal injected hydrogels, and that it takes place in the target region as bulk gels.

In the case of using alginate hydrogel, a 0.5 cm damage/hole cannot heal after 12 hours, but it can be self-healed with the opposite result of chitosan-based hydrogel. To better understand its self-healing property, we will need to take a look at the chemistry behind it.

In this, looking at –NH₂ groups and aldehyde groups will help to summarize the reason. The bonds between amine and aldehyde groups are called "false bonds", that is, the separation and reconnection between the bonds gives the ability to heal itself



 
 
 

Yorumlar


© 2023 by Scientist Personal. Proudly created with Wix.com

  • LinkedIn
bottom of page